Opening The Bios Selection Menu - Siemens SIMATIC IPC427E Operating Instructions Manual

8.7.2

Opening the BIOS selection menu

Procedure
1. Reset the device (warm or cold restart).
Depending on the device version, the default settings can differ from the figures shown.
The following message appears briefly on the display at the end of the self-test:
Press ESC for boot options
2. Press <ESC> to open the BIOS selection menu:
The following keys are available in the BIOS selection menu:
1
See also
General installation procedure (Page 70)
SIMATIC IPC427E
Operating Instructions, 02/2021, A5E37454814-AE
Buttons Function
Continue Exit selection menu, continue start sequence
Boot Manager Specify the boot media from which to boot:
•
•
Device Management Start device manager for UEFI boot media
Boot From File Boot from File: Start from an ".EFI" file
Secure Boot Option Configuration settings to start the device in Secure Boot mode. The only
1
software modules loaded are those that are known to be safe for the
BIOS or the operating system.
SCU Start BIOS Setup via Setup Configuration Utility
BIOS Update Update BIOS from USB memory stick
MEBx Start Intel Management Engine BIOS Extension from Active Management
Technology Support (AMT)
Supported by Windows 8 and higher
Hard disk drive
USB drive
Technical specifications
8.7 BIOS description
107