Notes On Usage - Siemens SIMATIC IPC427E Operating Instructions Manual

2.2

Notes on usage

Risks associated with the unprotected machine or plant
According to the results of a risk analysis, certain hazard potentials associated with the
unprotected machine exist. These hazards could lead to personal injury.
Avoid such hazards by taking the following precautions in accordance with the risk analysis:
• Installation of additional safety equipment on the machine or plant. In particular, the
• Use as intended must be validated for the device by means of a function test on the
• Documentation of the test results that you can enter in the relevant safety verification
Environment
NOTICE
Ambient conditions and chemical resistance
Unsuitable environmental conditions can cause faults or damage the device. Failure to
comply voids the warranty and the approvals in accordance with IEC/EN/UL 61010-2-201.
For this reason, please observe the following precautions:
• Always operate the device in closed rooms.
• Operate the device only in accordance with the ambient conditions specified in the
• Protect the device against dust, moisture and heat.
• Do not expose the device to direct sunlight or to other strong sources of light.
• Without additional safety measures, such as a supply of clean air, the device may not be
• Observe the permitted mounting positions of the device.
• Do not obstruct the venting slots of the device.
• Clean the enclosure surface with a damp cloth and make sure that no water enters the
Note
Use in an industrial environment without additional protective measures
The device has been designed for use in a normal industrial environment in accordance with
IEC 60721-3-3 (pollutant class 3C2 for chemical influences, 3S2 for dust without sand).
SIMATIC IPC427E
Operating Instructions, 02/2021, A5E37454814-AE
WARNING
programming, parameter assignment and wiring of the inserted I/O modules must be
executed in accordance with the safety performance identified by the necessary risk
analysis (SIL, PL or Cat.).
plant. These tests help you to identify programming, parameter assignment and wiring
errors.
documents, if necessary.
technical specifications.
used in locations with harsh operating conditions caused by acidic vapors or gases.
device.
Safety Instructions
2.2 Notes on usage
19