Connecting Peripheral Equipment - Siemens SIMATIC IPC427E Operating Instructions Manual

Procedure
NOTICE
Damage to the device
Do not adjust the screws in the connection terminal when it is plugged into the device. The
pressure of the screwdriver on the connection terminal and the socket can damage the
device.
Connect the wires to the connection terminal when it is not plugged in.
Note
Make sure that the cores are connected to the correct terminals. Observe the labeling for the
contacts on the cover of the device.
1. Connect the lines as shown. Make
sure the connection terminal is in the
correct position as shown.
3.3.3

Connecting peripheral equipment

Note
Observe suitability for industrial applications
Only connect I/O devices that are suitable for industrial applications in accordance with
EN IEC 61000-6-2.
Note
I/O devices capable of hot-plugging (USB)
Hot-plug I/O devices (USB) may be connected while the PC is in operation.
SIMATIC IPC427E
Operating Instructions, 02/2021, A5E37454814-AE
Installing and connecting the device
3.3 Connecting the device
35