Using Archives; Archiving A Route - Raymarine RC400 Owner's Handbook Manual

Chapter 5: Operation

5.9 Using Archives

The ARCHIVE function is used to save routes, tracks and waypoints to the
Gold Chart card. This is particularly useful if you use a lot of routes,
tracks or waypoints and do not wish to repeatedly re-enter these. Once
you have archived your data to the card, the copy on the chartplotter can
be deleted, thus freeing up memory.
Note: A typical 32Mb Gold Chart card will hold up to 500 waypoints or
20 routes, each with up to 50 waypoints. If the Gold Chart card also con-
tains chart files then these values will be lower.

Archiving a Route

➤
To archive a route:
1. In chart mode, press ENTER; the primary function bar is displayed:
2. Using trackpad left/right, select ARCHIVES.
3. Select ARCHIVE ROUTE. A list of routes currently loaded in the chart-
plotter is displayed. Use trackpad up/down to select the route you
wish to archive and press ENTER. To leave without archiving, press
CLEAR.
87
D6233-1
D6254-1