Clearing The Current Track - Raymarine Raychart 320 Owner's Handbook Manual

Chartplotter
Hide thumbs Also See for Raychart 320:
Table of Contents

Advertisement

Chapter 3: Operation
Note: Track points are not 'wasted' when the vessel is stationary as there
is a minimum distance separation, even when using a time interval set-
ting.
To set up a track:
1. From the chartplotter display, press the MENU key to display the set
2. Press the TRACK SETUP soft key to display the first level Track soft
3. Press the MORE... soft key to display the second level Track soft keys
4. Press the appropriate TRACK INTERVAL up/down soft key to set an
5. Press MORE to return to the first level Track soft keys.
6. Press the TRACK OFF ON soft key to toggle tracks on/off.
7. To return to the default soft key display, press CLEAR .

Clearing the Current Track

You can clear the current track from the screen. When you select CLEAR
TRACK , if the current track has not been saved, you have the option of
saving it.
To clear the current track:
1. Press the CLEAR TRACK soft key.
2. If the track has not been saved, the SAVE TRACK soft keys are dis-
up soft keys as shown in Figure 3-53.
Figure 3-53: Set Up Soft Keys
keys as shown in Figure 3-54:
Figure 3-54: First Level Track Soft Keys
as shown in Figure 3-55.
Figure 3-55: Second Level Track Soft Keys
appropriate TIME or DISTANCE interval.
Your vessel's trail will be displayed on-screen, with a line joining the
points at the selected interval.
played.
3-49
D4918-1
...
D4919_1
D4920-1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents