Creating A New Route - Raymarine Raychart 425 Owner's Handbook Manual

3-10
3. Select MORE to see more functions (Figure 3-18):
4. Select MORE again to return to the first level functions.
5. Press CLEAR to return to chart mode.

Creating a New Route

Note: If there is a current route on screen, it is cleared when MAKE
ROUTE is selected. If following the current route you are prompted to
STOP FOLLOW . Press ENTER to continue or CLEAR to abandon route
creation. If the route has not been saved you are prompted to save it.
Waypoints in a route can be added/removed after it has been created,
either via the ROUTES function or via the cursor (see Editing a Route in the
following sections).
➤
To make a new route by placing waypoints:
Note: You can pan the chart and change the scale whilst placing way-
points.
1. If necessary, move the cursor to the required area in which to make the
2. Select ROUTES then MAKE ROUTE . The MAKE ROUTE function is
3. Move the cursor to the position on the chart where the first waypoint
Note: The cursor can be placed on an existing waypoint, if required; the
PLACE WAYPOINT function changes to USE THIS WAYPOINT . Press ENTER
to use the waypoint.
The waypoint appears on the screen at the cursor position. The number
displayed alongside the waypoint identifies its position in the route.
Note: If the route is Cleared before it is saved, the waypoint is removed.
Figure 3-18: Second Level Functions
route and select a suitable chart scale.
replaced with PLACE WAYPOINT , together with help text
(Figure 3-19):
Figure 3-19: Place Waypoint Function
is to be placed and press ENTER .
Raychart 425 Chartplotter