Placing A Waypoint - Raymarine HSB Chartplotter User Manual

Chapter 3: Waypoints, Routes and Tracks
To access waypoint soft keys, press MARKS:
PLACE WPT
AT CURSOR

Placing a Waypoint

The Place and Goto a Waypoint Scenario in Chapter 2 provides a
simple example of how to place a waypoint.
To place a waypoint at the cursor position or at the vessel position:
1. Move the cursor to the required location, press MARKS.
2. Press either the PLACE WPT AT CURSOR or the PLACE WPT AT
PLACE WPT
AT CURSOR
VESSEL soft key.
The waypoint is added to the waypoint list and named using the next
PLACE WPT
available number.
AT VESSEL
The waypoint soft keys are displayed until you move the cursor away
from the waypoint. You can use the EDIT WAYPOINT soft key to
name the the waypoint as described in Editing Waypoints below.
To place a waypoint using the Waypoint List:
1. Press MARKS, followed by the WAYPOINT LIST soft key. The
Waypoint List and associated soft keys are displayed.
WAYPOINT
LIST
PLACE WPT
AT VESSEL
WAYPOINT LIST
SYMBOL
POSITION
BRG _186°
TEMP
---°
C
DATE
--/--/--
GOTO EDIT
WAYPOINT WAYPOINT
WAYPOINT
LIST
D4169-1
NAME
WAYPOINT 001
WAYPOINT 002
WAYPOINT 003
WAYPOINT 004
WAYPOINT 005
50°21^966N
001°20^368W
BRG _21.0nm
DEPTH
---
m
TIME
--:--:--
MAKE NEW WAYPOINT
WAYPOINT TRANSFER
45
D4262-1