Placing A Waypoint - Raymarine Raychart 320 Owner's Handbook Manual

Chapter 3: Operation

Placing a Waypoint

➤
To access the Place Waypoint soft keys, press MARK ; the Place
Waypoint soft keys are displayed as shown in Figure 3-21:
➤
To place a waypoint at the cursor (chartplotter screen) or the vessel's
current position:
1. Press either the PLACE WPT AT CURSOR or the PLACE WPT AT VESSEL
2. Press CLEAR to remove the Place Waypoint soft keys.
➤
To place a waypoint as a latitude/longitude position using the Waypoint
List:
1. Press MARK , followed by the WAYPOINT LIST soft key; the Waypoint
2. Press the MAKE NEW WAYPOINT soft key; the New Waypoint screen is
Figure 3-21: Waypoint Soft Keys
soft key. The waypoint is added to the Waypoint List and tagged using
the next available number.
If you place a waypoint at the cursor, the Waypoint soft keys shown
in Figure 3-27 are shown. Press CLEAR to remove these softkeys.
List and associated soft keys are displayed as shown in Figure 3-22:
WAYPOINT LIST
POSITION
BRG 348°
Figure 3-22: Waypoint List and Soft Keys
The list details all waypoints in alpha-numerical order. The selected
waypoint is indicated by the highlight bar; its position in Lat/Long,
bearing and range, date, time and, if placed at vessel, depth and tem-
perature (if available) are shown.
displayed, together with its associated soft keys, see Figure 3-23.
RNG 1.00
3-19
D4906-2