Placing A Waypoint - Raymarine Raychart 425 Owner's Handbook Manual

3-2
Up menu, as described in Chapter 4. The waypoint is added to the
waypoint list and named with the next available number. The edit
functions can be used to change the symbol and name. When the cursor is
positioned over a waypoint, the waypoint bearing and range are
displayed.
Waypoints can also be transferred between the chartplotter, other NMEA
connected instruments or a PC, using the Waypoint Transfer functions.
This section explains how to perform the following tasks using the
on-screen cursor and the waypoint list:
•
•
•
•
•
•

Placing a Waypoint

Note: It is not possible to place multiple waypoints at the same position.
➤
To place a new waypoint:
1. From chart mode, press ENTER ; the primary function bar is displayed
2. Using trackpad left/right, select WAYPOINTS (Figure 3-2).
3. To place a waypoint at the cursor position:
Placing a Waypoint
Selecting a Waypoint
Displaying Waypoint data
Editing a Waypoint (symbol, name & position)
Erasing a Waypoint
Moving a Waypoint
(Figure 3-1):
Figure 3-1: Primary Function Bar
Figure 3-2: Waypoints Soft Keys
i. Select PLACE WPT AT CURSOR . The selected function now has help
text appended to it (Figure 3-3):
Figure 3-3: Place Waypoint Function
Raychart 425 Chartplotter