Placing A Waypoint - Raymarine RC435i Owner's Handbook Manual

48

Placing a Waypoint

Note: It is not possible to place multiple waypoints at the same position.
➤
To place a new waypoint:
1. From chart mode, press ENTER; the primary function bar is displayed
2. Using trackpad left/right, select WAYPOINTS.
3. To place a waypoint at the cursor position:
4. To place a waypoint at the vessel's position:
FIND SHIP
OBJECT
ARCHIVES
INFO
PLACE WPT PLACE WPT
AT CURSOR AT VESSEL
i. Select PLACE WPT AT CURSOR. A description of the options avail-
able is displayed.
PLACE
WAYPOINT
ii. Place the cursor in the desired position on the chart and press
ENTER to place the waypoint. The waypoint is added to the way-
point list and named using the next available number.
The waypoint functions remain displayed so that further way-
points can be placed.
Use EDIT WAYPOINT to name the waypoint as described in Editing
Waypoint Details on page 52.
iii.When finished placing waypoints, press CLEAR.
Select PLACE WPT AT VESSEL. A new waypoint is placed at the ves-
sel's current position. If there is no position data available then no
waypoint is placed.
ROUTES WAYPOINTS
MORE¬
PLACE WPT
AT POS
MOVE CURSOR, "ENTER"TO PLACE
WAYPOINT, "CLEAR" TO QUIT
RC435 and RC435i Chartplotters
MORE¬
D6233-1
WAYPOINT
LIST
D6236-1
D4670-1