Table of Contents
Advertisement
Chapter 3: Waypoints, Routes and Tracks
Adding Waypoints at the End of the Route
To add waypoints at the end of the route:
1. Press the ROUTE soft key, followed by the EDIT ROUTE soft key.
EDIT
ROUTE
The Make Route soft keys are displayed and the cursor is connected
to the last-placed waypoint with a dotted line. You can add further
waypoints to the route in the same way as for a new route.
2. Move the cursor to the required location, and press PLACE
PLACE
WAYPOINT soft key.
WAYPOINT
If you place the waypoint in the wrong position, press the UNDO
UNDO
WAYPOINT softkey.
WAYPOINT
Note: You can UNDO waypoints in the original route, not just the
new ones.
ACCEPT
ROUTE
3. Place as many waypoints as required, and press the ACCEPT soft
key, then press ENTER to finish.
Removing a Waypoint from the Route
To remove a waypoint from the current route:
1. Move the cursor over the required waypoint unitl the letters WPT are
displayed. The waypoint soft keys are displayed.
REMOVE
WAYPOINT
2. Press the REMOVE WAYPOINT soft key. The waypoint is removed
from the route and the route is re-numbered.
Alternatively, you can remove the last waypoint from a route by pressing
the UNDO WAYPOINT soft key, as described above in Adding
Waypoints at the End of the Route .
If the route has not been saved, the waypoint is erased.
If the route has been saved, the waypoint remains on the screen.
Reversing the Route
To reverse the route, so you can Follow the route back:
1. Either press the ROUTE soft key followed by MORE, or
move the cursor over the required waypoint unitl the letters RTE are
displayed.
The route soft keys are displayed.
REVERSE
2. Press the REVERSE ROUTE soft key. The current route is reversed
ROUTE
on the screen.
59
Advertisement
Table of Contents
