Placing A Waypoint; At The Cursor; At Current Position - Raymarine A60 Owner's Handbook Manual

Chapter 3: Working with Waypoints

3.2 Placing a Waypoint

WPT AT
CURSOR
A waypoint can be placed at the cursor position, the boat's position or at a
position of your choosing (using lat/long coordinates). All waypoints can also be
used in the creation of routes.
When waypoints are placed they are given a default symbol and name. You can
change this default name or the symbol assigned to individual waypoints, if
desired. See "Editing a Waypoint" on page 57.

... at the cursor

WPT AT
CURSOR
To place a waypoint at the cursor position:
1. Move the cursor to the desired position for the waypoint.
2. Press WPTS/MOB.
3. Press WPT AT CURSOR:
• A waypoint is placed at the cursor position with a default name and sym-
bol.
• The Edit Waypoint box is displayed, enabling you to change waypoint
details. For more information refer to "Editing a Waypoint" on page 57.
4. To accept the default details press ENTER. The Waypoint List appears, dis-
playing your newly created waypoint.
5. Press ENTER or CANCEL. The Waypoint List is removed.

... at current position

To place a waypoint at the vessel's current position:
1. Press WPTS/MOB.
2. Press WPT AT VESSEL
• A waypoint is placed at your boat's position.
WPT AT
VESSEL POSITION. . .
WPT AT
VESSEL
WPT AT GOTO WPT
OPTIONS. . .
51
REV & EDIT
WAYPOINTS. . .
D9808-1