Placing A Waypoint - Raymarine C Series Reference Manual

Chapter 3: Working with Waypoints

3.3 Placing a waypoint

A waypoint can be placed at:
• The cursor position.
• Your vessel's position.
• At a position of your choosing (using lat/lon or Loran TD coordinates between 80
N/S).
When you are placing a waypoint, you can either accept the default or customize its
details. For more information see
Once a waypoint has been placed, you can view its details and edit them (if necessary).
For more information, see
... at the cursor
WPTS
MOB
... at your vessel's position
If the system cannot determine your position, a warning is displayed and the waypoint
is not placed.
... at a known position
WPTS
MOB
page 34
page 33
Move cursor to
required position
for waypoint
WPTS
WAYPOINT AT
MOB
VESSEL
Or
WPTS
x2
MOB
WAYPOINT AT
LAT/LON...
.
page 34
and .
WAYPOINT AT
CURSOR
Place Waypoint
Position:
50 50'.838N
o
01 06'.331W
Enter position
OK
Or
Wait 4 secs
Accepts default
OK
Or
Wait 4 secs
Accepts default
OK
x 2
31
0