Follow A Route - Raymarine HSB Chartplotter User Manual

Chapter 3: Waypoints, Routes and Tracks

Follow a Route

Note: The current route may have been created on this display, or
created on another unit and received on this display via SeaTalk.
To follow the current route:
1. Press the GOTO default soft key. The Goto/Follow soft keys are
GOTO
displayed.
Alternatively, place the cursor over a route leg until the letters RTE
and the route soft keys are displayed.
2. Press the FOLLOW ROUTE soft key.
FOLLOW
ROUTE
Your vessel's current position becomes the origin, and the first waypoint
in the current route becomes the target waypoint.
The soft keys change as follows:
STOP
FOLLOW
These options are described in the following sections.
To follow the current route in reverse:
1. Press the ROUTE default soft key, followed by MORE, or
place the cursor over a route leg until the letters RTE are displayed.
The route soft keys are displayed.
2. Press the REVERSE ROUTE soft key. The current route is reversed
REVERSE
ROUTE
on the screen.
3. Press the GOTO default soft key. The Goto/Follow soft keys are
displayed.
4. Press the FOLLOW ROUTE soft key.
FOLLOW
ROUTE
Your vessel's current position becomes the origin, and the first waypoint
in the current route becomes the target waypoint.
The soft keys change as follows:
STOP
FOLLOW
These options are described in the following sections.
GOTO RESTART
CURSOR XTE
GOTO RESTART
CURSOR XTE
WAYPOINT
ADVANCE
D4172-1
WAYPOINT
ADVANCE
D4172-1
61