Waypoints; Placing A Waypoint; Navigating To A Waypoint - Raymarine AXIOM Advanced Operation Instructions

6.1 Waypoints

Waypoints are used to mark specific locations or points of interest. Waypoints can be used in the
Chart, Radar and Sonar apps. Your MFD can store up to 10,000 waypoints which can be sorted into
up to 200 waypoint groups.
In the Chart app you can navigate to a waypoint by selecting Goto from the Waypoint context menu.

Placing a waypoint

1. Select and hold on the desired location and select Place waypoint from the context menu..
2. Select Edit to edit the waypoint details, Goto to navigate to the Waypoint, or OK to return
to normal operation.
To place a waypoint at your vessel's current location press the Waypoint/MOB
icon located next to the Homescreen icon.
Placing a waypoint at a specified lat/long
You can place a waypoint at a specified latitude and longitude.
1. Select New waypoint at lat/long from the New page in the Chart app menu: Menu > New >
New waypoint at lat/long
2. Enter the latitude and longitude for the waypoint.
3. Select Save.

Navigating to a waypoint

50