Erasing A Waypoint - Raymarine HSB Chartplotter User Manual

48
3. To edit the symbol, press the SYMBOL soft key.
Use the soft keys, shown in the following illustration, to highlight the
required symbol , then press ENTER.
4. To edit the waypoint name, press the NAME soft key.
The NAME WAYPOINT window is displayed.
Use the trackpad to enter or edit the name:
Use the left or right side of the trackpad to move the cursor to the
character you wish to change.
Use the top or bottom of the trackpad to scroll through the
characters.
When you have finished editing the name, to remove the window,
press ENTER. The waypoint name replaces the waypoint number.
5. Press the EDIT WAYPOINT soft key, followed by POSITION. The
EDIT
WAYPOINT
Waypoint Position pop-up is displayed.
Use the soft keys to select LAT, LON, BRG or RNG.
Use the trackpad to edit the value.
Use the left or right side of the trackpad to move the cursor to the
character you wish to change.
Use the top or bottom of the trackpad to scroll through the
characters.
Adjust each parameter until the waypoint position is correct.
When you have finished editing the position, press ENTER. The
Waypoint Position window is removed from the screen and the
default soft keys are displayed.
Press ENTER or CLEAR twice to return to the default softkeys.

Erasing a Waypoint

You cannot erase the target waypoint or waypoints that are used in
routes. However, you can remove a waypoint from the current route -
see Editing a Route in Section 3.3.
If you try to erase a waypoint that is used in a saved route you are
warned "WAYPOINT IS USED IN A ROUTE & CANNOT BE
DELETED"
SELECT SYMBOL
HSB Series Chartplotter
D4178-1