Table of Contents
Advertisement
262
OPERATION
Operating the Safety Belt
To fasten the safety belt, pull the belt out from the retractor and insert the latch into the
buckle. Verify proper lock of the latch by pulling on the latch.
Adjust the slack by pulling on the top part of the belt until the lower part, or the part that
crosses the lap, is adjusted to fit "snug." Release the top part and let the retractor pull the
belt in.
The lap portion of the safety belt should be worn low across the pelvic region (hip bone) and
adjusted snugly. Never adjust the lap belt across the abdomen. A push button on the buckle
is used to release the safety belt latch by pushing in the button release on the buckle.
W8001835
Hide quick links:
Advertisement
Table of Contents
