Table of Contents
Advertisement
214
INSTRUMENTS AND CONTROLS
CAUTION
Fresh water and waste water tanks must
be drained if the vehicle is not being used
and the outside temperature is below
freezing. Also drain the hose from the
pump to the faucet. Failure to drain the
system may result in component damage
due to water forming ice.
To fill the fresh water tank, unscrew the fill hose from the elbow fitting and remove the
fill cap (5) from the tank. The fill hose is connected to a hose with a garden hose-type
fitting. Before turning the water on, turn the valve handle (6) to close the valve (see lower
illustration). When the end of the fill hose is inserted in the water reservoir, open the valve
slowly to fill. The valve is fully open when the handle is parallel with the hose.
W8028577
Hide quick links:
Advertisement
Table of Contents
