240
OPERATION
•
Check slack adjusters and chamber push rod travel. With brakes applied or released,
look for conspicuously different positions of the slack adjusters.
•
Check spring brakes.
Step 14: Left Side of Trailer Area
Landing Gear or Dolly Area
•
Fully raised; no missing or damaged parts.
•
Crank handle present and secured.
•
If power operated, no air/hydraulic leaks.
Spare Wheel(s)
•
Spare wheel securely mounted in rack with no damage to rack.
•
Tire and wheel condition adequate for a spare: proper size, properly inflated.
Lights and Reflectors
•
Trailer side clearance lights: clean, operating and proper color.
•
Reflectors clean and proper color.
Frame and Body
•
Frame and crossmembers not bent, cracked, damaged or missing.
•
Proper placarding.
•
Body parts not damaged or missing.
Before Leaving the Parking Area
•
Remove chocks from the wheels.
•
Test trailer hook-up by slowly pulling while applying the trailer brakes with the trailer
brake hand control valve.
•
Test the service brakes before leaving the parking area.
•
Test parking brakes by stopping on a 20% grade and applying the parking brakes. The
parking brakes shall hold the combined vehicle and trailer without moving.