Description of this Upgrade
Step 7. Install *New* Left Inner Side Card Guides and Panel/Bracket
Step 7. Install *New* Left Inner Side Card Guides and Panel/Bracket
Install card guides (N5242-40002) into new inner side panel/bracket. Refer to
Figure 12 on page 27
1. Gather the new inner panel N5242-00055 (not shown, but similar to
Install the card guides that were removed from the old left inner panel using
needle nose pliers Q-23640A-1 or equivalent and if required, a flat head
screw driver (see
panel's installed card guides with card number
Figure 10 on page 25
guide installation on the new N5242-00055 inner panel, if you ignore card
guide number
2. Install the *NEW* left inner panel/bracket into the chassis base.
Figure 12
Secure New Left Inner Panel Screws
Installation Note N5222-90133
for this procedure.
N5221-00003).
Figure 11 on page
above, shows the correct left side inner panel card
.
— Reverse the order of the removal procedure in
Old Left Side Outer and Inner Brackets" on page
7 on page 22
and to
26), so that they mirror the right inner
removed (not shown).
Figure 12 on page
27.
"Step 6. Remove the
22. Refer to
Figure
27