Table of Contents
Advertisement
Description of this Upgrade
Step 16. Add Back Plate and Cable to Rear Panel (Option 422/423 With and Without
Option 029 Only)
Figure 27
Install Semirigid Cable (N5240-20127). See also,
(1)
(1) Connect the other end of the N5240-20127 cable to the back plate.
Torque to 21 in-lbs.
(2) Connect the N5240-20127 cable to the DD synthesizer J7. Torque to
10 in-lbs.
Installation Note N5222-90133
Figure 21 on page
39.
(2)
45
Advertisement
Table of Contents
