Description of this Upgrade
Step 6. Remove the Old Left Side Outer and Inner Brackets
Remove the Left Inner Panel/Bracket and Card Guides and a Single Card Guide
from the Right Panel. And, then reuse card guides in the new left panel. Save
all hardware for reuse, unless otherwise indicated.Refer to
page 25
8. Lift the left side of the chassis and remove the last x2 loose screws that
9. Lift and remove the inner panel.
10. Remove all of the card guides (item
11. On the new left-side inner bracket (N5242-00055) install all of the card
12. Remove the corresponding card guide number
13. Left side bracket can be recycled (discarded).
Figure 10
Left Inner Bracket Card Guides Installation (N5242-40002 (x7))
Installation Note N5222-90133
and
Figure 11 on page
were on either end of the inner panel securing it to the chassis. Refer to
Figure 8 on page
23.
from old left panel/bracket (item
necessary a flat head screw-driver. Save the card guides for reuse.
guides removed in step 10, except card guide number
panel (see
Figure 11 on page
Optional: Remove and retain card guide number
recycle/discard.
26.
) except for card guide number
) using needle nose pliers and if
26).
Figure 10 on
.
from the right inner
as a spare. Else,
25
)