Table of Contents
Advertisement
Description of this Upgrade
Step 4. Remove Most Top Assemblies and Cables
B. Remove the 15 Midplane Board
For N5221/2B, refer to your Service Guide's "Removing and Replacing the
A4–13 Boards" section. For N5241/2/9B, refer to your Service Guide's
"Removing and Replacing the A4–13 Boards (For analyzers with serial numbers
prefixed MY/SG/US5201 and above)" section. Set aside all hardware for use.
C. Remove the A16 Power Supply
Refer to your Service Guide's "Removing and Replacing the A16 Power Supply
Assembly" section.
D. Remove the A17 CPU Board
Refer to your Service Guide's "Removing and Replacing the A16 Power Supply
Assembly" section.
E. Remove the Rear Panel
Refer to your Service Guide's "Removing and Replacing the Rear Panel"
section.
F. Remove the A18 GPIB Board
Refer to your Service Guide's "Removing and Replacing the A18 GPIB Board"
section.
Installation Note N5222-90133
19
Advertisement
Table of Contents
