Table of Contents
Advertisement
Note
For access control devices without the video channel. You need to select trigger channel in
linkage action configuration first. For details, refer to Configure Linkage Actions .
.
Click
to edit added alarm device information.
●
2.2 Configure the Linkage Action and Arming Schedule
Configure the linkage actions and arming schedule for access control or alarm devices. Linkage
actions will be triggered when the designate alarm occurs.
Steps
1. Click
of an added IoT device.
2. Select Event Type. The following configuration is only valid for the selected event type.
3. Check Enable.
4. Check linkage actions as your desire. For detailed steps, refer to Configure Linkage Actions .
Note
Full Screen Monitoring and OSD Display are only valid for the selected Trigger Channel.
5. Click Arming Schedule.
6. Configure arming schedule. For detailed steps, refer to Configure Arming Schedule . Linkage
action is only valid during the set schedule.
7. Click Apply.
2.3 Configure OSD
You can display alarm information received from IoT devices on live view image.
Network Video Recorder User Manual
Figure 2-4 Configure IoT
18
Advertisement
Table of Contents
