Table of Contents
Advertisement
1.1 Activate Your Device
1.1.1 Default User and IP Address
Default administrator account: admin.
●
Default IPv4 address: 192.168.1.64.
●
1.1.2 Activate via Local Menu
For the first-time access, you need to activate the device by setting an admin password. No
operation is allowed before activation. You can also activate the device via Web Browser, SADP or
Client Software.
Steps
1. Enter the admin password twice.
Warning
We highly recommend you to create a strong password of your own choosing (using a minimum
of 8 characters, including at least three kinds of following categories: upper case letters, lower
case letters, numbers, and special characters) in order to increase the security of your product.
Network Video Recorder User Manual
Chapter 1 Basic Operation
Figure 1-1 Activate via Local Menu
1
Advertisement
Table of Contents
