Activate Via Sadp - HIKVISION DS-96000NI-M8 Series User Manual

And we recommend you reset your password regularly, especially in the high security system,
resetting the password monthly or weekly can better protect your product.
2. Enter the password to activate the IP cameras.
3. Optional: Check Export GUID, Security Question Configuration, or Reserved E-mail Settings.
4. Click OK.
Note
After the device is activated, you should properly keep the password.
●
You can duplicate the password to the IP cameras that are connected with default protocol.
●
What to do next
When you have enabled Export GUID, continue to export the GUID file to the USB flash driver
●
for the future password resetting.
When you have enabled Security Question Configuration, continue to set the security questions
●
for the future password resetting.
When you have enabled Reserved E-mail Settings, continue to set the reserved email for the
●
future password resetting.

1.1.3 Activate via SADP

SADP software is used for detecting the online device, activating the device, and resetting its
password.
Before You Start
Get the SADP software from the supplied disk or the official website, and install the SADP
according to the prompts.
Steps
1. Connect your video recorder power supply to an electrical outlet and turn on it.
2. Run the SADP software to search the online recorders.
3. Check the recorder status from the device list, and select the inactive recorder.
Network Video Recorder User Manual
2