Cdr Sensor - Epson Stylus Photo R2000s Series Service Manual

EPSON Stylus Photo R1900/R2880/R2000/R2000s/SC-P400 Series
Make sure that the FFC is routed as shown in
A D J U S T M E N T After replacing or removing the Ink Mark Sensor and the PW Sensor,
R E Q U I R E D
always make the required adjustments referring to the following.
• "Chapter 5
Adjustment
Disassembly And Assembly
Figure 4-169
(p.139)"
Removing the Sensors

4.6.4 CDR Sensor

1. Remove the Paper EJ Frame Assy / Front Cover / CDR Tray Base. (p.114)
2. Disengage the two hooks that secure the CDR Sensor and remove the CDR
Sensor.
CDR Sensor
Figure 4-170. Removing the CDR Sensor
Revision I
Hooks
136