Left & Right Guide Stackers / Cdr Guide Sensor - Epson L800 Service Manual

L800/L801
1.5.7 Left & Right Guide Stackers / CDR Guide Sensor
¸ Removal procedure
Be careful of the seven sharp edges shown in
C A U T I O N
assembling or reassembling.
̈
Left / Right Guide Stacker Removal
1. Remove the screw and remove the Left Guide Stacker.
Screw : C.B.P. M3x8 (tightening torque: 5-7 kgf.cm)
2. Remove the screw and remove the Right Guide Stacker.
Screw : C.B.P. M3x8 (tightening torque: 5-7 kgf.cm)
Left Guide Stacker
Left Guide Stacker
Sharp edge
Figure 1-66. Removing the Left / Right Guide Stacker
Disassembly/Reassembly
Downloaded from www.Manualslib.com
Fig.1-66 when
Right Guide Stacker
Left & Right Guide Stackers / CDR Guide Sensor
manuals search engine
̈
When installing the Left Guide Stacker, insert the rib indicated
with in Fig.1-67 and match the positioning holes and guide
pins indicated with
̈
When installing the Right Guide Stacker, match the
positioning holes and guide pins indicated with
pairs) in Fig.1-67.
Left Guide
Stacker
Figure 1-67. Installing the Left / Right Guide Stacker
̈
CDR Guide Sensor Removal
1. Disengage the two hooks on the back of the CDR Guide Sensor and remove
the CDR Guide Sensor.
Right Guide Stacker
CDR Guide Sensor
Figure 1-68. Removing the CDR Guide Sensor
Revision A
(two pairs).
(two
Right Guide
Stacker
[Back Side]
Hooks
44
Confidential