Adjustment; Summary; Servicing Adjustment Item List (For Stylus Photo R2000/R2000S) - Epson Stylus Photo R2000s Series Service Manual

Stylus Photo R1900/R2880/R2000/R2000s/SC-P400 Series

8.4 Adjustment

8.4.1 Summary

This section describes new adjustment items & changed adjustment items for
Stylus Photo R2000/R2000s only. For other adjustment items, please refer to
the information of Stylus Photo R1900/R2880.
Item List" )
(p.140)

8.4.2 Servicing Adjustment Item List (For Stylus Photo R2000/R2000s)

The items, purposes and outlines of the Adjustment Program are given in the following table.
Adjustment
MAC address setting Perform MAC address setting if necessary.
(in the Initial setting)
PF motor heat protection This is used to correct variations of motors characteristics.
control
Initialize front tray print This conter is added by using the front tray printing. When this
counter conter is added, PF Roller feeds more area of the paper than
default. When exchange the PF Roller, please initialize this
Disable front tray print
counter for preventing more than enough paper feeding.
counter
If you can't read the data, please enter the maximum front tray
print counter.
Mist Recovery check To prevent the dirt inside the printer, the mist is induced to the
direction of the Lower Paper Guide by electricity.The
adjustment name was changed from High Voltage Module
inspection.
Stylus Photo R2000/R2000s
("5.1.1 Servicing Adjustment
Table 8-16. Adjustment Items (For Stylus Photo R2000/R2000s)
Purpose
Adjustment
For the procedure of MAC address setting, refer to
The program will automatically enter a proper correction value onto the printer.
The program will automatically enter a initial value onto the printer.
The program will automatically enter a maximum value onto the printer.
The procedure of the Mist Recovery check is same as High Voltage Module inspection. refer to
(p.142)
High Voltage Module inspection
Method Outline
(p.195)
Mac address setting
Revision I
192