Epson Stylus Photo R2000s Series Service Manual page 110

EPSON Stylus Photo R1900/R2880/R2000/R2000s/SC-P400 Series

Align the guide pin and four Tabs on the ASF Assy with the
positioning holes on the Main Frame so that there is no gap
between the ASF Assy and the Main Frame.
Tab
Figure 4-97. Reinstalling the ASF Assy

Tighten the screws in the order shown in
Disassembly And Assembly
Guide pins
Tab
Tab
Tab
Figure 4-96.
Disassembling the Printer Mechanism
A D J U S T M E N T After replacing or removing the ASF Assy, always make the required
R E Q U I R E D
adjustments referring to the following.
• "Chapter 5
Adjustment
Revision I
(p.139)"
110