Table of Contents
Advertisement
Appliance installation
INSTALLATION
Note
Make sure that the installation room for the indoor
unit is well ventilated when any work is being car-
ried out.
9.
Appliance installation
CAUTION: Risk of cuts
Indoor and outdoor units contain sheet metal parts
with sharp edges.
»
Beware of sharp metal edges, especially with
dismantled appliance casing panels.
»
Wear gloves to protect your hands.
9.1
Installation of indoor unit
9.1.1
Delivery and transportation
The appliance is delivered on a one-way pallet, wrapped
in film. The appliance casing is assembled on delivery.
Note
Should you notice any transportation damage to
the appliance, you must report such damage im-
mediately when the delivery is unloaded. Claims
for transportation damage cannot be made sub-
sequently.
Material damage
»
Protect the appliance from damage by using
lifting slings.
»
When transporting, protect the appliance from
impact.
►
The appliance is secured to the one-way pallet of the
transport packaging with screws.
►
The transport packaging or one-way pallet is suitable
for transportation using a forklift truck.
►
For level transportation to the installation location, the
appliance may remain in the transport packaging.
►
Leave the appliance in the transport packaging or on
the one-way pallet for lifting and moving by crane or
forklift.
►
The standard packaging of the appliance does not
provide protection against the weather or sea water.
►
The appliance may be stored and transported only at
temperatures of between -20°C and +45°C.
►
The appliance must be stored in its transport
packaging.
32
Note
If the route to the installation location is difficult, the
transport packaging should be removed.
Note
If narrow doors or corridors impede handling, the
top and bottom sections of the appliance can be
separated. (See page 34, Separating the appli-
ance sections)
Please note the following when removing the transport
packaging:
»
Remove the transport packaging.
»
Undo and remove the 4 screws securing the appli-
ance to the one-way pallet.
»
Slightly tilt the appliance and screw in the 4 adjusta-
ble feet supplied.
»
Lift the appliance from the pallet.
»
Use the recessed handles on the bottom and back of
the appliance for better grip during transportation.
www.ochsner.com | PIA-982043-AIR FALCON-T200-in-EN
Advertisement
Table of Contents
