Appliance installation
»
Undo the 4 screws on the tabs at the front of the
appliance.
»
Pull the top section towards the front.
»
Tilt the top section towards the back. Use the grip rail
for better grip.
PIA-982043-AIR FALCON-T200-in-EN | www.ochsner.com
1 Grip rail
»
Set the top appliance section on a pad or mat to avoid
damage.
9.1.6
Assembling the appliance sections
Assemble the appliance sections in reverse order.
The positioning aids and dotted line markings facilitate
positioning and sliding the top appliance section into the
guiding groove on the lower section:
35