Table of Contents
Advertisement
Device description
Note
With an air/water heat pump, frost may form on
the evaporator fins of the outdoor unit, depending
on the air temperature (below approx. +7°C), air
humidity and the operating point. The evaporator
fins are automatically de-iced again in cyclical de-
frosting mode of the heat pump.
Fan:
The outdoor air is drawn through the evaporator by a quiet
fan.
Compressor:
The fully hermetically sealed compressor is designed for
high efficiency heat pump applications.
4.3.3
Heat pump control unit
The OTS heat pump controller includes software capable
of automatically controlling heat pump heating systems
with a cooling function as well as DHW heating.
All the settings required in the system can be made using
the controller on the heat pump or via the app.
The OTS controller can control the following system circuits
and heat generators:
►
1x direct circuit (heating and/or cooling)
►
1x direct or mixed circuit (heating and/or cooling)
►
1x directly heated DHW tank
►
1x heat pump (heating and cooling)
►
1x internal, electric auxiliary heater
4.4
Name plate
To identify your heat pump, name plates are attached to
the indoor and outdoor unit.
►
The type plate on the indoor unit is located on the
side casing panel.
12
1 Name plate on indoor unit
►
The type plate on the outdoor unit is located on the
side casing panel.
1 Name plate on outdoor unit
www.ochsner.com | 00_200_202_08_02_002-EN
Advertisement
Table of Contents
