Table of Contents
Advertisement
Appliance installation
WARNING
The permitted carrying load for each person is re-
stricted by law.
»
Observe all applicable national and regional
regulations and provisions.
»
Follow the transport instructions on the appli-
ance.
Material damage
When being transported with the appliance casing
dismantled, sensitive components will be exposed.
»
Take care when transporting the appliance.
9.1.2
Positioning the appliance
»
Position the appliance at the intended installation
location.
»
Observe minimum clearances.
»
Align the appliance horizontally using the adjustable
feet.
9.1.3
Disassembling the appliance casing
Removing the front casing
»
Undo and remove the screw from the top centre of
the appliance.
»
Unhook the front cladding towards the top.
»
Disconnect the touchscreen communication cable
plug from the controller.
PIA-982043-AIR FALCON-T200-in-EN | www.ochsner.com
»
Disconnect the power cable plug from the
touchscreen.
1 Power supply
2 Touchscreen
»
Remove the front casing.
Removing the top appliance casing
»
Undo and remove the screws on the top of the
casing.
»
Remove the top appliance cladding.
»
Remove the thermal insulation material underneath.
33
Advertisement
Table of Contents
