Adjusting The Chain Guide; Checking The Frame; Checking The Link Fork; Checking The Rubber Grip - KTM SX-E 3 2023 Owner's Manual

13.27

Adjusting the chain guide

Info
The size of the chain wheel varies with the number of teeth. The chain guide can be adjusted on small
sprockets.
13.28

Checking the frame

13.29

Checking the link fork

13.30

Checking the rubber grip

–
Remove screw
–
Position the chain guide.
–
Mount and tighten the screw.
Guideline
Remaining screws,
chassis
M01693-10
–
Check the frame for damage, cracks, and deformation.
» If the frame shows signs of damage, cracks, or deforma-
tion:
–
Change the frame.
Guideline
Repairs on the frame are not permitted.
M01652-01
–
Check the link fork for damage, cracks, and deformation.
» If the link fork shows signs of damage, cracks, or deforma-
tion:
–
Change the link fork.
Guideline
Repairs on the link fork are not permitted.
F02203-01
–
Check the rubber grips on the handlebar for damage, wear,
and looseness.
Info
The rubber grips are vulcanized onto a sleeve on the
left and onto the handle tube of the throttle grip on the
right. The left sleeve is clamped onto the handlebar.
The rubber grip can only be replaced with the sleeve or
the throttle tube.
401197-01
» If a rubber grip is damaged or worn:
–
Change the rubber grip.
SERVICE WORK ON THE CHASSIS 13
1
.
M6 10 Nm (7.4 lbf ft)
65