Table of Contents
Advertisement
MAINTENANCE WORK ON CHASSIS AND ENGINE
Adjusting chain guide
x
9.25
Checking brake discs
9.26
Warning
Danger of accidents Reduced braking due to worn brake discs.
–
Worn brake discs should be replaced immediately in an authorized KTM workshop.
–
Remove screws
Conditions
Number of teeth: ≤ 44 teeth
–
Insert nut
–
Mount and tighten screws
Guideline
Remaining screws, chassis
Conditions
Number of teeth: ≥ 45 teeth
–
Insert nut
–
Mount and tighten screws
Guideline
Remaining screws, chassis
100299-10
and
. Take off the chain guide.
in hole
. Position the chain guide.
and
.
in hole
. Position the chain guide.
and
.
M6
10 Nm (7.4 lbf ft)
M6
10 Nm (7.4 lbf ft)
82
Advertisement
Table of Contents
