Seagull Models Grumman F8F Bearcat Assembly Manual page 5

Secure the servo to the aileron hatch us-
ing Phillips screwdriver and the screws
provided with the servo.
7.
Apply 1-2 drops of thin C/A to each of
the mounting tabs. Allow the C/A to cure
without using accelerator.
8.
C/A glue
Remove the string from the wing at the
servo location and use the tape to attach
it to the servo extension lead. Pull the lead
through the wing and remove the string.
9.
10.
11.
12.
Set the aileron hatch in place and use a
Phillips screw driver to install it with four
wood screws.
13.
3x10mm
5