Seagull Models Grumman F8F Bearcat Assembly Manual page 31

14.
INSTALLATION PILOT AND CANOPY
Locate items necessary to install pilot and
canopy.
1.
A scale pilot is included with this ARF. he
Pilot included itting well to the cockpit.
(or you can order others scale pilot igures
made by SG Models. hey are available at
SG Models distributors.)
If you are going to install a pilot igure,
please use a sanding bar to sand the base
of the igure so that it is lat.
Position the pilot igure on the canopy
loor as show. Locate the oval shaped on
the canopy loor and remove the cover-
ing. Use epoxy to glue this into the base of
the pilot igure and glue the cockpit panel
in place with C/A glue, please see pictures
as shown.
2.
3.
4.
Epoxy canopy onto the fuselage. Trace
around the canopy and onto the fuselage
using a epoxy.
31