Cisco FPR1010-ASA-K9 Getting Started Manual page 19

Threat Defense Deployment with the Management Center
Step 4
If you want to configure additional interfaces, including an interface other than outside or inside, choose
Device, and then click the link in the Interfaces summary.
See Configure the Firewall in the Device Manager, on page 107
interfaces in the device manager. Other device manager configuration will not be retained when you register
the device to the management center.
Step 5 Choose Device > System Settings > Central Management, and click Proceed to set up the management
center management.
Step 6 Configure the Management Center/CDO Details.
Complete the Threat Defense Initial Configuration Using the Device Manager
for more information about configuring
Cisco Firepower 1010 Getting Started Guide
17