Deploy The Firewall With Low-Touch Provisioning - Cisco FPR1010-ASA-K9 Getting Started Manual

Threat Defense Deployment with CDO
Figure 41: Cisco SSO Dashboard
Step 6 Click the authenticator logo to choose Duo Security or Google Authenticator, if you have set up both
authenticators.
• If you already have a user record on an existing tenant, you are logged into that tenant.
• If you already have a user record on several tenants, you will be able to choose which CDO tenant to
• If you do not already have a user record on an existing tenant, you will be able to learn more about CDO

Deploy the Firewall With Low-Touch Provisioning

After you receive the threat defense from central headquarters, you only need to cable and power on the
firewall so that it has internet access from the outside interface. The central administrator can then complete
the configuration.
Provide the Firewall Serial Number to the Central Administrator
Before you rack the firewall or discard the shipping box, record the serial number so you can coordinate with
the central adminstrator.
Procedure
Step 1 Unpack the chassis and chassis components.
Take inventory of your firewall and packaging before you connect any cables or power on the firewall. You
should also familiarize yourself with the chassis layout, components, and LEDs.
Step 2
Record the firewall's serial number.
The serial number of the firewall can be found on the shipping box. It can also be found on a sticker on the
on the bottom of the firewall chassis.
Step 3 Send the firewall serial number to the CDO network administrator at your IT department/central headquarters.
connect to.
or request a trial account.
Deploy the Firewall With Low-Touch Provisioning
Cisco Firepower 1010 Getting Started Guide
129