Cisco FPR1010-ASA-K9 Getting Started Manual page 127

Threat Defense Deployment with CDO
Application Name
Version Cluster Oper State
-------------------- ---------- --------------- -------------------- ---------------
--------------- ------------------
ftd
Step 3 If you want to install a new version, perform these steps.
a) If you need to set a static IP address for the Management interface, see
Using the CLI, on page
You will need to download the new image from a server accessible from the Management interface.
b) Perform the
Log Into CDO
CDO uses Cisco Secure Sign-On as its identity provider and Duo Security for multi-factor authentication
(MFA). CDO requires MFA which provides an added layer of security in protecting your user identity.
Two-factor authentication, a type of MFA, requires two components, or factors, to ensure the identity of the
user logging into CDO.
The first factor is a username and password, and the second is a one-time password (OTP), which is generated
on demand from Duo Security.
After you establish your Cisco Secure Sign-On credentials, you can log into CDO from your Cisco Secure
Sign-On dashboard. From the Cisco Secure Sign-On dashboard, you can also log into any other supported
Cisco products.
• If you have a Cisco Secure Sign-On account, skip ahead to
• If you don't have a Cisco Secure Sign-On account, continue to
Create a New Cisco Secure Sign-On Account
The initial sign-on workflow is a four-step process. You need to complete all four steps.
Before you begin
• Install DUO Security―We recommend that you install the Duo Security app on a mobile phone. Review
• Time Synchronization―You are going to use your mobile device to generate a one-time password. It
• Use a current version of Firefox or Chrome.
Slot ID
1
Not Applicable
136. By default, the Management interface uses DHCP.
reimage procedure
on page 128.
Account, on page 125.
Duo Guide to Two Factor Authentication: Enrollment Guide
is important that your device clock is synchronized with real time as the OTP is time-based. Make sure
your device clock is set to the correct time.
Admin State Operational State
Enabled Online
in the FXOS troubleshooting
Cisco Firepower 1010 Getting Started Guide
Running Version Startup
7.2.0.65
Perform Initial Configuration
guide.
Log Into CDO with Cisco Secure Sign-On,
Create a New Cisco Secure Sign-On
if you have questions about installing Duo.
Log Into CDO
7.2.0.65
125