Cisco FPR1010-ASA-K9 Getting Started Manual page 126

(Optional) Check the Software and Install a New Version
(Optional) Check the Software and Install a New Version
To check the software version and, if necessary, install a different version, perform these steps. We recommend
that you install your target version before you configure the firewall. Alternatively, you can perform an upgrade
after you are up and running, but upgrading, which preserves your configuration, may take longer than using
this procedure.
What Version Should I Run?
Cisco recommends running a Gold Star release indicated by a gold star next to the release number on the
software download page. You can also refer to the release strategy described in
us/products/collateral/security/firewalls/bulletin-c25-743178.html; for example, this bulletin describes short-term
release numbering (with the latest features), long-term release numbering (maintenance releases and patches
for a longer period of time), or extra long-term release numbering (maintenance releases and patches for the
longest period of time, for government certification).
Procedure
Step 1
Power on the firewall and connect to the console port. See
Threat Defense and FXOS CLI, on page 157
Log in with the admin user and the default password, Admin123.
You connect to the FXOS CLI. The first time you log in, you are prompted to change the password. This
password is also used for the threat defense login for SSH.
Note
Example:
firepower login: admin
Password: Admin123
Successful login attempts for user 'admin' : 1
[...]
Hello admin. You must change your password.
Enter new password: ********
Confirm new password: ********
Your password was updated successfully.
[...]
firepower#
Step 2 At the FXOS CLI, show the running version.
scope ssa
show app-instance
Example:
Firepower# scope ssa
Firepower /ssa # show app-instance
Cisco Firepower 1010 Getting Started Guide
124
If the password was already changed, and you do not know it, you must perform a factory reset to
reset the password to the default. See the
Power on the Firewall, on page 134
for more information.
FXOS troubleshooting guide
Threat Defense Deployment with CDO
https://www.cisco.com/c/en/
and Access the
for the factory reset procedure.