Cisco FPR1010-ASA-K9 Getting Started Manual page 167

Threat Defense Deployment with CDO
Step 4
Click the shut down device icon (
Step 5 When prompted, confirm that you want to shut down the device.
Step 6
If you have a console connection to the firewall, monitor the system prompts as the firewall shuts down. You
will see the following prompt:
System is stopped.
It is safe to power off now.
Do you want to reboot instead? [y/N]
If you do not have a console connection, wait approximately 3 minutes to ensure the system has shut down.
Step 7 You can now unplug the power to physically remove power from the chassis if necessary.
What's Next
To continue configuring your threat defense using CDO, see the
) in the System section.
Cisco Firepower 1010 Getting Started Guide
Cisco Defense Orchestrator
What's Next
home page.
165