Cisco FPR1010-ASA-K9 Getting Started Manual page 187

ASA Deployment with ASDM
Step 2
The Startup Wizard walks you through configuring:
• The enable password
• Interfaces, including setting the inside and outside interface IP addresses and enabling interfaces.
• Static routes
• The DHCP server
• And more...
Step 3
(Optional) From the Wizards menu, run other wizards.
Step 4 To continue configuring your ASA, see the documents available for your software version at
Cisco ASA Series Documentation.
Cisco Firepower 1010 Getting Started Guide
Configure the ASA
Navigating the
185