Table of Contents
Advertisement
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.
IC Notice (Canada Only)
Most tape devices are classified by the Industry Canada (IC) Interference-Causing Equipment Standard #3 (ICES-003) as Class B digital
devices. To determine which classification (Class A or B) applies to your tape device, examine all registration labels located on the bottom
or the back panel of your device. A statement in the form of "IC Class A ICES-3" or "IC Class B ICES-3" will be located on one of these
labels.
Note that Industry Canada regulations provide that changes or modifications not expressly approved by the tape device manufacturer could
void your authority to operate this equipment.
This Class B (or Class A, if so indicated on the registration label) digital apparatus meets the requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la Classe B (ou Classe A, si ainsi indiqué sur l'étiquette d'enregistration) respecte toutes les exigences du
Reglement sur le Materiel Brouilleur du Canada.
EN 55022 Compliance (Czech Republic Only)
This device belongs to category B devices as described in EN 55022, unless it is specifically stated that it is a category A device on the
specification label. The following applies to devices in category A of EN 55022 (radius of protection up to 30 meters). The user of the
device is obliged to take all steps necessary to remove sources of interference to telecommunication or other devices.
CE Notice
Marking by the symbol
indicates compliance of this device to the EMC (Electromagnetic Compatibility) directive of the European
Community. Such marking is indicative that this tape library meets or exceeds the following technical standards:
EN 55022 – "Limits and Methods of Measurements of Radio Interference Characteristics of Information Technology Equipment." This
system is EN 55022 Class B device (CISPR 22).
EN 50081-1 – "Electromagnetic compatibility – Generic emission standard Part 1: Residential, commercial and light industry."
EN 55024:1998 – Information technology equipment – Immunity characteristics – Limits and methods of measurements.
IEC 60950:1991+A1/A2/A3/A4 – "Safety of Information Technology Equipment including Electrical Business Equipment".
Declaration of Conformity
The signed Declaration of Conformity is on file with Advanced Digital Information Corporation, 17275 NE 67th Court, Redmond,
Washington 98052, and ADIC Europe, ZAC des Basses Auges 1, rue Alfred de Vigny, 78112 Fourqueux,
iv
Advertisement
Table of Contents
Troubleshooting
