Dimensions; Data Transfer Rate; Electrical Interface; Physical Interface - ADIC LTO 200D User Manual

Drive

Type

Media Type
Data Capacity

Data Transfer Rate

(compressed mode)
Enclosure

Electrical Interface

Physical Interface

Reliability
Maintenance
MTBF
Physical

Dimensions

Weight
Environment

Electrical

BTU/Hour
Temperature
Humidity
Vibration
Shock
50 Troubleshooting and Diagnostics
LTO 200D
®
IBM Ultrium™ Generation 1
LTO™ tape drive
LTO-1
100 GB per cartridge (200 GB
compressed, assuming 2:1
compression)
15 MB/sec (30 MB/sec, assuming 2:1
compression)
LVD/SE Ultra-2 SCSI or HVD
Ultra-2 SCSI
68-pin, shielded, high-density device

connector

Periodic cleaning of drive head using
LTO cleaning cartridge
250 000 power on hours at 100%
duty cycle
14.6 cm (5.75in.) height, 17.1 cm
(6.75in.) width, 33.6 cm (13.25in.)
depth
6.59 kg (14.3 lb)
100–240 VAC, 50–60 Hz
300
10 C to 38 C (50° to 100 F)
Operating
10% to 80% Operating
0.5G (5–500 Hz) Operating
15G Operating
LTO 400D
®
Contains an IBM TotalStorage™ LTO
Ultrium 2 tape drive
LTO-2
200 GB per cartridge (400 GB
compressed, assuming 2:1 compression)
35 MB / sec (70 MB / sec, assuming 2:1
compression)
LVD Ultra-3 SCSI
68-pin, shielded, high-density device
connector
Periodic cleaning of drive head using
LTO cleaning cartridge
250 000 power on hours at 100% duty
cycle
14.6 cm (5.75in.) height, 17.1 cm
(6.75in.) width, 33.6 cm (13.25in.)
depth
6.59 kg (14.3 lb)
100–240 VAC; 50–60 Hz
Under 250
10 C to 38 C (50° to100 F)
Operating
10% to 80% Operating
0.2 G (2–200 Hz) Operating
30G Operating