Quantum DX100 User Manual page 50

Quantum DX-Series User's Guide
LED On/Flash/Off
System LEDs- Power On
Green or (Green LED)
Yellow
System Fault
(Yellow LED)
Temp Fault
(Yellow LED)
Port LEDs- Off
Green or
On Green
Yellow
On Yellow
Flashing Green
Power On
Supply/Fan
LED - Green
Off
Chapter 2 Basic Operations
DX-Series Fibre Channel Switch Operations
Description
The switch is plugged in and the
internal power supplies are
functional.
An event has occurred that meets or
exceeds the current Fault LED
threshold setting. Contact Quantum
Customer support.
The internal temperature has
exceeded acceptable levels. Contact
Quantum Customer support.
An SFP is not installed in the port.
An SFP is installed in the port and a
link has been established. This is the
normal port operational status.
The port has an SFP installed but a
link has not been established.
Data is being transferred between
the port and the device.
The power supply and fan is
functioning normally.
The power supply or fan has failed.
Contact Quantum Customer
Support.
31