Quantum DX-Series User's Guide
Click OK to return to the Utilities page.
5
Uploading System Configuration File
This option allows a saved configuration file to be uploaded to the
current DX-Series system. The system configuration contains all of the
configuration information entered by the DX-Series system administrator
including:
•
IP configuration
•
All other configured features
To upload a system configuration file:
Access the Utilities page (see
1
Click the Configuration tab (see
2
Under Upload New System Configuration File, type the location
3
and filename of the new configuration file.
Use the
Note:
desired system configuration file. The configuration file
must be named
Click Upload to load the configuration file.
4
An Successful Upload page displays indicating that the
configuration file has been placed in a temporary area of the system.
Click Ok to continue.
Click Activate to activate the configuration file (see
5
Chapter 3 DX-Series Remote Management
Accessing
figure
button to browse the system and locate the
Browse
.
sys.cfg
Utilities).
64).
figure
65).
Utilities
3
95