Dx-Series Storage Array Operations; Storage Array Lcd - Quantum DX100 User Manual

DX-Series Storage Array Operations

Storage Array LCD

Quantum DX-Series User's Guide
Button/LED
Network port 1
Network port 2
Power supply status
Fan status
This section describes how to monitor the DX-Series storage array. The
DX-Series storage array can be monitored either through the front LCD
panel, various LEDs located on the front and back of the unit, and also
through an audible alarm. Refer to the following sections for descriptions
of the LCD and component LEDs:
• Storage Array LCD
• RAID Controller LEDs
• Control Module LEDs
• BBU LEDs
• Power Supply LEDs
• Fan Module LEDs
• Audible Alarm
The storage array LCD is located in the upper left corner of the unit (see
2
figure 12).
Chapter 2 Basic Operations
DX-Series Storage Array Operations
Description
This LED flashes indicating activity on the
first network port
This LED flashes indicating activity on the
second network port
Green indicates a good status on both power
supplies. Red indicates a single power
supply failure
Green indicates a good status on all internal
cooling fans. Red indicates at least one fan
failure.
2
21