Quantum DX100 User Manual page 141

Quantum DX-Series User's Guide
For 400GB Drives:
If you select
a
cartridges per RAID set. The capacity decreases the more tape
cartridges you create. For example, if you select 1 tape cartridge
per RAID set, each cartridge has approximately 1.7 TB (1.45 TB
for the second RAID set) in capacity. If you select 80 tape
cartridges, each cartridge has 20 GB capacity.
If you select
b
and 1450 for second RAID set) capacity per cartridge. The
number of cartridges decreases with higher capacity per
cartridge. For example, if you select 20 GB per cartridge, the
number of cartridges per RAID set is 80. If you select 1700 GB per
cartridge, the number of cartridges per RAID set is 1.
Note:
The cartridges are created on the storage arrays. Press
6
continue.
The DX-Series Setup Menu displays.
Type 5 to restart the DX software services.
7
Note:
The DX-Series system is now initially configured and ready to be
accessed via the management web pages. Disconnect the cable from
the DX-Series controller serial port.
, you can create between 1 and 80
By quantity
, you choose between 20 and 1700 GB (43
By capacity
The capacity estimates mentioned in the examples above
assume a RAID 5 configuration on the storage array with
"global hot" spare. If a "global hot" spare is not used, the
total capacity is increased by 400GB. If two "global hot"
spares are used, the total capacity is decreased by 400GB.
Restarting DX software services does NOT reboot the
DX-Series system and takes much less time to complete.
Appendix B Setup CD and Setup Menu
DX-Series Setup Menu
2
to
Enter
122